Product Details
WP-B series clip free IP65 LED triproof batten
Waterproof, dust-proof, and corrosion-proof is the most symbolic of the led tri-proof light( also called vapor-tight/proof or waterproof light). In order to reach the protection requirements of the fixtures, special anti-oxidation and anti-corrosion materials and silicone sealing rings are used. The maximum sealing of the luminaire without affecting the lighting.
Features
• IP65
•Clips free
• PC diffuser,PC base
• Steel gear tray
•Quick connector optional
•Back wiring optional
• Easy installation
• 5 years warranty
Options
• Emitting color:CCT1/CCT3 tunable
• Function : on-off microwave sensor /dimmable sensor/ 1-10V
dimmable/ DALI /emergency/through wiring
• Installation : Surface mounting/suspending
•Cable gland:PG9 or PG13.5,quick connector or common
Application
•Industry
•Warehouses
•Offices
•Supermarkets, DIY stores, electronics retailers, showrooms
Technical Specifications
Item No |
WP-B-218 |
WP-B-236 |
WP-B-258 |
Rated Power |
20W |
40W |
60W |
Product size L*W*H(mm) |
605*80*75 |
1205*80*75 |
1505*80*75 |
Mounting distance(mm) |
360-410 |
790-860 |
910-980 |
Input voltage |
120-277V~ 50/60Hz |
PF |
>0.9 |
>0.9 |
>0.9 |
Efficiency(LM/W) |
120 |
Lumen(LM) |
2400 |
4800 |
7200 |
CCT(K) |
4000K |
Beam angle |
120° |
CRI |
80 |
Ta/Tc (°C) |
40℃/70℃ |
Ambient Humidity |
0-95% |
Ambient Temperature(°C) |
-10~40 |
Storage Temperature(°C) |
-20~80 |
Driver type |
Non-Isoalted |
Driver efficiency |
>90% |
IRF |
>5% |
Certificates |
CE ROHS SAA UKAS ENEC CB |
Safety class |
Class II |
LED type |
SMD2835 |
LED chip brand |
SAN AN.Other brands optional |
Warranty |
5 years |
Lifespan |
50000 Hours |
IP class |
65 |
Installation |
Surface mounting/suspending |
Material |
PC base and PC milky diffuser,steel reflector |
Color consistency in level |
Max. 6 SDCM |
THD |
<15% |
Starting Time |
<0.5S |
Switching Cycle before Failure |
>100 000 times |
Premature failure rate @1000h |
0 |
Lumen maintenance @6000h |
80% |
Product net weight(KG) |
1 |
1.5 |
2 |
Installation
a. ceiling mounting
Fix base section of the batten to the ceiling, Connect the AC power cable to the terminal block, either through the top or via the end cap.
B. Suspending
Connect the LED module to the base section with the two wire ropes to support the weight, Join the ends of the internal power cable together.
Lock the two halves together, match diffused led module together with gear tray base and then lock the clips to secure the batten.
http://www.ip65-led.com/